Due to its high tensile strength and low cost, this material is best used in: Buildings infrastructure, Electrical-appliances, Weapons, Tools, Ships, Trains, Cars and Machines.
Foundation:
Minimum percentage of
steel = 0.7%
The quantity of steel = (0.5 / 100) x 1 = 0.005 m³
Steel weight = 0.005 x
7850 = 39.25 kg /m³
Maximum percentage of steel = 0.8%
The quantity of steel = (1.0 / 100) x 1 = 0.008 m³
Steel weight = 0.008 x
7850 = 62.80 kg / m³
Column:
Minimum percentage of
steel = 0.7%
The quantity of steel = (0.8 / 100) x 1 = 0.008 m³
Steel weight = 0.008 x
7850 = 62.80 kg / m³
Maximum percentage of steel = 6.0%
The quantity of steel = (6.0 / 100) x 1 = 0.06 m³
Steel weight = 0.06 x
7850 = 471 kg / m³
Beam:
Minimum percentage of
steel = 1.0%
The quantity of steel = (1.0 / 100) x 1 = 0.01 m³
Steel weight = 0.01 x 7850 = 78.5 kg / m³
Maximum percentage of steel = 2.0%
The quantity of steel = (2.0 / 100) x 1 = 0.02 m³
Steel weight = 0.02 x 7850 = 157 kg / m³
Slab / lintel:
Minimum percentage of steel = 0.7%
The quantity of steel = (0.7 / 100) x 1 = 0.007
m³
Steel weight = 0.007 x 7850 = 54.95 kg / m³
Maximum percentage of steel = 1.0%
The quantity of steel = (1.0 / 100) x 1 = 0.01 m³
Steel weight = 0.01 x
7850 = 78.5 kg / m³
ALSO READ:
Rate Analysis and Measurement of Brickwork
Compaction factor test of concrete
STEEL -Steel quantity per m³
Basic Thumb Rules used in Construction by Civil Engineers
Plastering - cement plaster and calculation of quantities of Cement, Sand & Water required for Plastering
How to Calculate Staircase Dimensions and Slope
How to Check the Quality of Bricks at Construction Site
Calculation of unit weight of steel bars per metre
Important points for site engineers in construction field
Measurement of Horizontal Distance Using Auto Level
After a day casting, why does cracks develop in RCC slab?
See More:
Plan of Shop 5.3 m x 8.9 m with Office Store and Washroom
Plan of the Quarter Area -11.9m x 10.1m
Calculation of Cement, Sand and Aggregate for M-10, M-15, M-20 and M-25 (Nominal mixes)
What are different diameters of steel used in construction field
Plans of Villa Type House (60'-8" x 63'-5" ) with Double Height Lobby
Unit Weight of Different Building Materials
Abbrevations used in Civil Engineering Field
A Simple Design Plan of Cottage
Plan of the area about 648 square feet - 18'-2" x 35'-8"
Ground and First Floor Plan of House - 30' x 41' - 6"
For Testing:
Slump cone test, Silt content, Water absorption, Bulking of sand
Compaction factor test of concrete
Los Angeles Abrasion test on Aggregates
Post a Comment